The latest model of the fibre laser for cutting tubes and profiles, equipped with an automatic storage-feeding system and a receiving magazine for finished components. The automation of the laser cutting process significantly improves work efficiency. The available laser power options include 1000W, 2000W, 3000W, 4000W, and 6000W.
Fibre laser cutting machines are modern devices distinguished by numerous advantages. They are not only an excellent and much more cost-effective alternative to CO2 technology but also have many strengths that allow production to increase (up to 70%) and improve its quality. FIBER technology enables cutting of sheets and other materials of various thicknesses — from very thin to very thick. The wavelength in a FIBER laser is 1.064 micrometres. These properties result in an intensity 100 times higher than that of CO2 machines of comparable power.
The chuck grips the profile in two directions and automatically performs centring.
Wireless controller for convenient operation.
An intelligent tube support system is used to eliminate deformation during the cutting of long tubes.
The machine allows placement of entire bundles of tubes. During the cutting process, the system automatically positions a single tube in the working area. The finished product is automatically dropped into the storage container.
| WORKING RANGE | 20–240 mm |
| POWER | 1000W, 2000W, 3000W, 4000W, 6000W |
| MAXIMUM ACCELERATION | 1.2G |
| MAXIMUM SPEED | 60 m/min |
| REPEATABLE POSITIONING ACCURACY | ±0.004 mm/m |
| POWER SUPPLY | 400V 50Hz |
Actual parameters may vary depending on technical conditions and materials used.
