The CORMAK BS260G metal bandsaws, equipped with a hydraulic cylinder, coolant system and pivoting arm up to 60 degrees, combined with blades from the renowned German manufacturer Roentgen, are widely used in locksmith and metalworking shops where precision, quality and cutting speed matter most.
Product characteristics
The horizontal CORMAK BS260G metal bandsaw with a pivoting arm enables cutting in a plane perpendicular to the axis of the material being cut, as well as at any angle from 0° to 60°. The material can be fed manually or by any mechanical feeding device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant impact on blade guidance, service life, straightness, accuracy and cutting quality. The rigidly constructed arm is made of cast profiled iron. The control panel is located on the arm. Power from the electric motor is transmitted to the drive wheel of the cutting blade via a motor with a worm gearbox. The cutting blade is tensioned on two cast-iron wheels using a manual tensioner and guided by adjustable rolling and sliding carbide guides. Inside, there is a separate coolant tank with an electric pump. The arm descent speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is adjusted via the bandsaw’s control panel. Two blade speeds are available: 36 and 72 m/min. When the arm reaches its lower position (after cutting the material), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. An additional safety feature automatically switches off the bandsaw in the event of blade breakage.
| Blade size [mm] | 2455 x 27 x 0.9 |
| Blade tension | mechanical (manual) |
| Blade speeds [m/min] | 36, 72 |
| Feed rate [m/min] | 0–50 (stepless feed) |
| Arm lowering control | stepless – hydraulic cylinder |
| Vice base height [mm] | 1010 |
| Power supply | 3-phase 400V |
| Motor power [kW] | 1.1 |
| Dimensions [mm] | 1950 x 750 x 1900 mm |
| Weight [kg] | 220 |
| Warranty [months] | 24 |
| User manual | CE certification |
| CE declaration | yes |
| Angle |  |
 |
 |
| 0° | Ø230 | 260 x 150 | 225 x 225 |
| 45° | Ø165 | 180 x 130 | 165 x 165 |
| 60° | Ø105 | 100 x 90 | 110 x 110 |
